Philips AZUR GC4820 Mode D'emploi page 15

8 Wait until the temperature light goes out and then remove the iron
from the stand.
9 Hold the iron over the sink, press and hold the Calc-Clean button
and gently shake the iron to and fro.
Steam and boiling water come out of the soleplate. Impurities and
,
flakes (if any) are flushed out.
10 Release the Calc-Clean button when the water tank is empty.
11 Repeat the Calc-Clean process if the water that comes out of the
iron still contains a lot of scale particles.
after the Calc-Clean process
1 Put the iron back onto the stand to let the soleplate dry.
2 Unplug the iron when the temperature light has gone out.
3 Move the iron gently over a piece of used cloth to remove any water
stains that may have formed on the soleplate.
4 Let the iron cool down before you store it.
storage
1 Set the steam control to position 0, remove the plug from the wall
socket and let the iron cool down.
2 Set the mode switch to cordless ironing.
3 Empty the water tank.
EnGlish
15