Preparing For Use; Filling The Water Tank - Philips AZUR GC4820 Mode D'emploi

EnGlish
8
2 GC4820 only: Remove the carry case from the appliance.
3 Remove any sticker, protective foil or plastic from the soleplate.
4 Fully unwind the mains cord.
5 Rinse and dry the filling cup.

preparing for use

Fastening the stand clamp
1 Fold out the stand clamp on the bottom of the stand and fix the
stand clamp with the fixing screw to the ironing board or to another
stable surface, such as a tabletop.
Note: The rubber feet on the bottom prevent the stand from slipping.
Note: You can also place the stand on the ironing board without using the
clamp. The clamp then remains folded in.
Do not place the stand close to the table edge, as the stand could
accidentally be knocked over.

Filling the water tank

type of water to be used
Your appliance has been designed to be used with tap water. In case
you live in an area with very hard water, fast scale build-up may occur.
Therefore, it is recommended to mix 50% distilled water and 50% tap
water to prolong the lifetime of your appliance.
Do not use distilled water only, as it is slightly acidic and may cause
damage to your appliance.
Do not put perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the water tank, as your appliance is not designed to
work with these chemicals.