Philips AZUR GC4820 Mode D'emploi page 10

EnGlish
10
1 Put the iron on the stand.
2 To set the required ironing temperature, turn the temperature dial
to the appropriate position (see the 'Temperature and steam settings'
table above).
Note: Check the laundry care label for the fabric type.
3 Set the appropriate steam setting (see the 'Temperature and steam
settings' table above).
Note: Make sure that the steam setting you select is suitable for the set ironing
temperature.
4 Put the mains plug in an earthed wall socket.
, The temperature light goes on to indicate that the iron is heating up.
tips
- If the fabric consists of various kinds of fibres, always select the
temperature required by the most delicate fibre, i.e. the lowest
temperature. For example: if an article consists of 60% polyester and
40% cotton, it should be ironed at the temperature indicated for
polyester ( 1) and without steam.
- If you do not know what kind or kinds of fabric an article is made
of, determine the right ironing temperature by ironing a part that is
not visible when you wear or use the article.
- Silk, woollen and synthetic materials: iron the reverse side of the fabric to
prevent shiny patches. To prevent stains, do not use the spray function.
- Start ironing the articles that require the lowest ironing temperature,
such as those made of synthetic fibres.