Using The Appliance; Ironing Without Steam; Other Features - Philips Mistral GC2115/02 Mode D'emploi

ENGLISH
6
For versions with auto shut-off (type GC2225 only) (see
also 'Other features')
C
If the automatic shut-off function has been activated (red pilot
light blinks), move the iron slightly to deactivate this function (red
pilot light stops blinking).

Using the appliance

Steam ironing
Make sure that there is enough water in the water tank.
1 Set the temperature dial to the recommended position.
See 'Setting the temperature'.
C
2 Set the steam control to the appropriate steam position.
- Á for minimum steam (temperature settings 2 and 3).
- Ë for moderate steam (temperature settings 3 to MAX) (Types
GC2225, GC2220, GC2215 and GC2120 only).
- È for maximum steam (temperature settings 3 to MAX).
Steaming will start as soon as the set temperature has been reached.
B
Types GC2215, GC2120, GC2115, GC2110 and GC2105 only
Water may leak from the soleplate if the set temperature is too low
(MIN to 2).
GC2225 and GC2220 only.
The iron is equipped with a drip stop system (see also 'Other features).

Ironing without steam

1 Set the steam control to position O (= no steam).
2 Set the temperature dial to the recommended position.
See 'Setting the temperature'.

Other features

Spraying
To remove stubborn creases at any temperature
1 Make sure that there is enough water in the water tank.