Ironing Without Steam - Philips GC8261 Mode D'emploi

1 Hold the iron in vertical position and press the steam trigger to
steam iron hanging curtains and clothes (jackets, suits, coats).
Shot of steam (GC8261/GC8260/GC8225/GC8220 only)
A powerful shot of steam helps to remove stubborn creases.
1 Set the temperature dial to a position between 3 and MAX.
 Press the shot-of-steam button.
Note: Use the shot-of-steam function intermittently. If water droplets come out
of the soleplate, let the iron heat up for at least one minute before you use the
shot-of-steam function again.

ironing without steam

There are one or two ways to iron without steam:
- All types: Simply start ironing without pressing the steam trigger.
- GC8261/GC8260/GC8225/GC8220 only: Select steam setting a (no
steam) and start ironing.
tips
- When you steam iron woollen fabrics, shiny patches may occur. To
prevent this, use a dry pressing cloth or turn the article inside out and
iron the reverse side.
- Silk, woollen and synthetic materials: iron the reverse side of the fabric
to prevent shiny patches.
- Iron velvet and other fabrics that tend to acquire shiny patches in one
direction only (along with the nap) while you apply very little pressure.
- Do not use steam when you iron coloured silk. This could cause stains.
EnGlish
11