Emerson CURVA SKY CF145LBS00 Manuel Du Propriétaire page 17

8. Remote Control Procedures
8.4
Your Emerson Ceiling Fan/Light Remote Control
consists of Hand-Held Transmitter and a Receiver which
is mounted under the Fan Ceiling Cover.
When power is restored, push and hold the fan OFF
Button ( ) for 3 to 5 seconds to set the code in the
Receiver (Figure 26).
NOTE: The power indicator light on the Remote
Control will flash when the code is set.
WARNING
!
Fan installation must be completed, including the
installation of the fan blades, before testing the remote
control.
8.5
The Remote Control is designed to separately control your
Ceiling Fan speed and light intensity (Figure 27).
If airflow is desired in the opposite direction, press the (
Button on the Remote Control. The Fan must be operating
at any speed for the Reverse Button to function. The
blades will turn in the opposite direction and reverse the
airflow.
To set the desired fan speed, press the (
decrease the speed and the (
speed (Figure 27).
NOTE: The Power Indicator Light on the Remote
Control will light up to indicate the new speed
selected.
)
) Button to
) Button to increase the
17
(Continued)
Figure 26
Figure 27
Please contact 1-800-654-3545 for further assistance
POWER INDICATOR
LIGHT
OFF
BUTTON
POWER INDICATOR
LIGHT
FAN SPEED
BUTTONS
AIRFLOW
BUTTON
emersonfans.com
U.L. Model No.: CF145L & CF153L