Repairs - Festo DGC-8 Série Notice D'utilisation

DGC
2. Lubricate the roller bearing through the
holes on both sides of the slide.
For this purpose use a grease gun with
pinpoint nozzle or alternatively a dispos
able syringe with needle.
Permitted grease types
DGC−8/12−KF
LUB−LG0
Fig. 31: Grease types for the roller bearing
S Push the slide backwards and forwards during lubrication. Otherwise the
grease cavities will not be filled to an equal extent.
Alternatively, Festo offers a service inspection which includes lubrication.
Otherwise the DGC does not require any maintenance.
10

Repairs

Recommendation: Send the product to our repair service. The necessary
S
accurate adjustments and tests will then be taken into consideration.
Information on spare parts and assistant devices can be found under
S
www.festo.com/spareparts
Replacing cushioning elements
Note the section Accurate adjustment of the stroke" in the chapter
S
Commissioning."
Festo DGC 0901d English
Fig. 30
DGC−18...63−KF
LUB−RN2
45