Replacing The Battery - Anslut 019716 Mode D'emploi

EN
NOTE:
• Keep sharp objects away from the surface of the solar
panel to prevent scratching and damage.
• The functionality of the product can be checked by
covering the top of the solar panel – the light should go on
if the product has started.
• It is difficult to see the LED light in bright ambient light.
The product works best in the dark. This does not mean
that the product is not working.
• For best functionality, allow the product to charge for one
day before using for the first time.

REPLACING THE BATTERY

Follow the instructions to replace the rechargeable AA battery
(NiMH).
1. Unscrew the screws on the bottom of the casing with a
screwdriver and open the battery cover.
2. Replace the battery with a new one of the same type
(rechargeable AA battery, 1.2 VDC, 300 mAh, NiMH).
3. Replace the battery cover and firmly tighten the screws.
FIG.
NOTE:
• Do not mix old and new batteries.
• Do not mix alkaline batteries with ordinary batteries or
rechargeable batteries (NiCd, NiMH etc.).
16
4