FLAEM Wi.Neb Go Mode D'emploi page 17

OPERATION WITH EXTERNAL POWER SUPPLY
OPERATION WITH POWER ADAPTOR
OPERATION WITH CIGARETTE LIGHTER RECEPTACLE
12V
Plug the power adaptor into mains socket that is com-
patible with the device voltage. After using the device
unplug it; the socket must be placed so as to allow for
convenient disconnection from the power mains.
Insert the "L" jack of the power adaptor cable in the DC
plug of the device.
Insert the cigarette lighter plug in the 12V DC cigarette
lighter receptacle of the vehicle/ camper/ boat. Check
the User Manual of the vehicle to make sure that the
voltage supplied is 12V DC.
Insert the "L" jack of the cigarette lighter cord in the DC
plug of the device.
ENGLISH
- 15