Know Your Pressure Washer - GreenWorks GPW 1703 Manuel Du Propriétaire

KNOW YOUR PRESSURE WASHER

The safe use of this product requires an understanding of the information on the tool and in this
operator's manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.(See Figure 2.)
ON/OFF Switch
DETERGENT TANK
Remove the cap from the detergent tank to add detergent to the pressure washer.
GFCI PLUG
The pressure washer power cord is equipped with a GFCI plug to guard against the hazards of
ground fault currents. This plug does not protect against short circuits, overloads, or shocks.
AUTO ON/OFF SWITCH:
This pressure washer is equipped with an Auto Start/Stop feature. To operate: Set power switch
to the On (I) position. Pump will pressurize and shut down immediately. Once the trigger of the
gun is depressed the unit will turn on. Unit will shut off and be in standby mode when trigger is
released.
POWER CORD STORAGE
The power cord can be wrapped and stored around the hook.
TRIGGER AND WAND ASSEMBLY
The Trigger and Wand allows you to operate the pressure washer by depressing the trigger to
activate the pump to spray water using the desired spray tip.
Handle
Trigger and
wand assembly
Gun
holder
9
Nozzle
storage
Detergent
tank
Fig. 2