Know Your Pressure Washer - GreenWorks ELITE EPW-2000 Guide D'utilisation

Masquer les pouces Voir aussi pour ELITE EPW-2000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

KNOW YOUR PRESSURE WASHER

The safe use of this product requires an understanding of the information on the tool and in this
operator's manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.(See Figure 2.)
Tip Storage
ON/OFF Switch
Detergent
Tank
DETERGENT TANK
Remove the cap from the detergent tank to add detergent to the pressure washer.
GFCI PLUG
The pressure washer power cord is equipped with a GFCI plug to guard against the hazards of
ground fault currents. This plug does not protect against short circuits, overloads, or shocks.
$872 212)) 6:,7&+
This pressure washer is equipped with an Auto Start/Stop feature. To operate: Set power switch
to the On (I) position. Pump will pressurize and shut down immediately. Once the trigger of the
gun is depressed the unit will turn on. Unit will shut off and be in standby mode when trigger is
released.
POWER CORD STORAGE
The power cord can be wrapped and stored around the hook.
TRIGGER AND WAND ASSEMBLY
The Trigger and Wand allows you to operate the pressure washer by depressing the trigger to
activate the pump to spray water using the desired spray tip.
Trigger and
wand assembl
9
Power Cord
Storage
Fig. 2

Publicité

Table des Matières
loading

Table des Matières