Electrical; Electrical Connection; Power Cord - GreenWorks GPW 1703 Manuel Du Propriétaire

ELECTRICAL

ELECTRICAL CONNECTION

This product has a precision-built electric motor. It should be connected to a power supply that
is 120 volts, 60 Hz, AC only (normal household current). Do not operate this product on direct
current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat.
DRIP LOOP
To prevent water from flowing along the power cable, and possibly reaching the electrical outlet
and plug, we recommend using a simple drip loop as shown below.
W A R N I N G
Keep the extension cord clear of the working area. Position the cord so that it will not get caught on
lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can
result in serious personal injury.
8

Power cord

Drip Loop
Fig. 1