Error And Safety Codes - Atag OX6411B Mode D'emploi

ERROR AND SAFETY CODES

Code General Function
An error of the oven may cause
low performance and problems
in safety. Stop using the oven
immediately.
1)
E-
**
-SE-
SAFETY SHUTOFF
S-01
Oven has continued operating at set
temperature for prolonged time.
If you did not select an appropriate
- - - -
temperature for the mode.
EN 20
1) * refers to all numbers or characters.
Solution
Call local ATAG customer service.
Turn the oven off and remove food.
Allow the oven to cool down before
using again.
Select the correct temperature
for the mode (see section "Using the
Fast Preheating mode", page 13)