Bluetooth Connection - WaterLink SpinTouch 3580 Manuel D'utilisation

®
The WaterLink Connect Desktop application and a USB connection to a Windows PC is
required to update the meter's fi rmware.
®
WATERLINK CONNECT MOBILE APP
Test results from the WaterLink
Connect mobile app for supported Android
for download on the Apple
To transfer test results to the WaterLink
1. Ensure Bluetooth is enabled on your phone or tablet. (It is not necessary to "pair" the
Spin Touch to your device).
2. Open the WaterLink
3. Perform a water test normally using the WaterLink
section, page 9.)
4. From the Results screen on the Spin Touch, tap the highlighted
results via Bluetooth.
The test results will be stored in the app with a date and time stamp and will be viewable
from the at the top right corner of the app screen.

BLUETOOTH CONNECTION

The WaterLink ® Spin Touch
as a phone or tablet, and the Mobile Bluetooth Printer (Code 5-0066). The Spin Touch
will only connect to and print from the LaMotte Bluetooth Printer [Code 5-0066]. Other
Bluetooth printers are not supported.
Whenever the button appears on the touch screen the Spin Touch is capable of
connecting to a Bluetooth enabled phone or tablet. The
connected and be dim when not connected. Whenever the
screen the Spin Touch is capable of connecting to the Mobile Bluetooth Printer (Code
5-0066). The will be highlighted when connected and dim when not connected. The
Spin Touch cannot connect to both a phone or tablet and the printer at one time. (See the
Save, Print and Send, page 10)
The WaterLink Spin Touch will automatically connect to the nearest Bluetooth enabled
phone or tablet or printer. It is not necessary to pair the Spin Touch a Bluetooth enabled
device. Barriers to wireless signals can reduce the range of wireless devices. The WaterLink
Spin Touch will work best if there are no walls between it and the receiving devices.
®
DATAMATE WEB
It is possible to log into DataMate
Web takes the water test results a step further by providing step-by-step treatment
recommendations to balance the tested water, a full scheduling and routing work order
system for mobile users, and much more. To log into DataMate
Connect app, tap the login icon in the upper right hand corner and enter your login
credentials.
Visit www.waterlinkconnect.com
a subscription account.
While logged into DataMate
transferred to the app, allowing the app to produce treatment recommendations. However,
a "test session" must be open on the app for the results to be properly received. To do so:
1. Log into DataMate
2. Select a customer to start the work order (or create a new one from the "Create Work
® Spin Touch
®
® ®
iTunes and Google
®
Connect mobile app:
® Connect mobile app on your phone or tablet.
™ is capable of connecting to a Bluetooth enabled device, such
®
Web via the WaterLink
for more information about DataMate
® Web, results from the WaterLink
®
Web from the mobile app.
™ lab can be transferred to the WaterLink
®
and iOS devices. The app is free and available
®
Play stores.
®
Spin Touch
will become highlighted when
button appears on the touch
®
Connect mobile app. DataMate
®
® Spin Touch
4
™
(see the "Testing"
to transfer the
Web from the WaterLink
® Web or to create
™ can still be
®
®
®