Before First Use; Device Connection - WaterLink SpinTouchDW Mode D'emploi

Photomètre
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SETUP

BEFORE FIRST USE

¬ Fully charge battery using the USB cable and adapter plug in AC outlet.
¬ Ensure your Spin Touch has latest fi rmware
1. Download and install WaterLink® Connect Application for Windows at
http://softwarecenter.lamotte.com/. Select WaterLink® Connect Software
for Windows FREE Download.
2. Plug meter into the computer with the provided USB cable and launch
WaterLink Connect Application from the Start Menu.
3. Any fi rmware updates will automatically be applied to the meter.
METER
1. The meter can be powered from an AC outlet, a computer or the internal battery.
2. Use the USB cable and the adapter to plug the meter into an AC outlet.
3. Use the USB cable to connect the meter to the USB port of a computer.
CHARGE THE BATTERY
1. Use the USB cable and the adapter to plug the meter into an AC outlet to charge the
battery.
2. The battery icon on the screen will show the battery status. Charge the battery until
the battery indicator is full.
FIRMWARE UPDATES
After updating fi rmware it is recommended that the Alignment Procedure on page 12 be
performed.
For technical issues, fi rmware updates, and other support issues contact technical support
at 800-344-3100 or support@lamotte.com.
PC CONNECTION
The Spin Touch DW may be interfaced with any Windows-based 64 bit computer by using
the LaMotte WaterLink Connect program and a USB cable. The program will store test
information and results in a local database, and allow for exporting this data to a comma
separated value (CSV) fi le. The Spin Touch DW will send the following data: time/date
stamp, name of test, sample value, sample units, meter name, and location. To download
WaterLink Connect go to http://softwarecenter.lamotte.com/. Select WaterLink® Connect
Software for Windows FREE Download.

DEVICE CONNECTION

®
The WaterLink
Spin Touch
with bluetooth enabled devides.
BLUETOOTH CONNECTION
®
The WaterLink
Spin Touch
such as a phone or tablet, and the Mobile Bluetooth Printer (Code 5-0066). At this
time, although the meter can connect to a phone or tablet, software is not available
for transferring data. The Spin Touch
LaMotte Bluetooth Printer (Code 5-0066). Other Bluetooth printers are not supported.
®
uses Bluetooth
low energy technology (BLE) to communicate
is capable of connecting to a Bluetooth enabled device,
is confi gured to connect to and print, only to the
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

3585

Table des Matières