Before First Use; Device Connection - WaterLink SpinTouch 3580 Manuel D'utilisation

SETUP

BEFORE FIRST USE

¬ Fully charge battery using the USB cable and adapter plug in AC outlet.
¬ Ensure your Spin Touch has the latest fi rmware:
1. Download and install the WaterLink
Windows
2. Plug meter into the computer with the provided USB cable and launch
WaterLink
3. Any fi rmware updates will automatically be applied to the meter.
METER
1. The meter can be powered from an AC outlet, a computer or the internal battery.
2. Use the USB cable and the adapter to plug the meter into an AC outlet.
3. Use the USB cable to connect the meter to the USB port of a computer.
CHARGE THE BATTERY
1. Use the USB cable and the adapter to plug the meter into an AC outlet or use the
USB cable (included) with a car charger ( not included) to charge the battery. (Anker
PowerDrive 2, DC 12/24V, 5V = 4.8A, Part Number A2310 recommended.)
2. The battery icon on the screen will show the battery status. Charge the battery until
the battery indicator is full.
FIRMWARE UPDATES
Occasionally, the fi rmware in the Spin Touch will require updates. To do so:
1. Visit www.waterlinkconnect.com/downloads/application
®
WaterLink Connect application for Windows.
2. Plug the Spin Touch into the computer using the included USB cable.
3. Open the WaterLink
complete.
Once the update is complete, it is safe to close WaterLink
After updating fi rmware it is recommended that the Alignment Procedure on page 16 be
performed.
PC CONNECTION
When the WaterLink
touchscreen becomes disabled and operation of the lab is performed using the WaterLink
Connect Desktop application for Windows
waterlinkconnect.com/downloads/application. Via the WaterLink
application, results from the Spin Touch
such as DataMate ®

DEVICE CONNECTION

®
The WaterLink Spin Touch
with bluetooth enabled devides. Download the free WaterLInk
appropriate app market. A USB cable is included for connection to a Windows
To operate the lab from a PC, the WaterLink
installed. This is available for free at www.waterlinkconnect.com/downloads/application.
®
at www.waterlinkconnect.com/Downloads/Application.
®
Connect desktop application from the Start Menu.
®
Connect desktop application and wait for the update to
® ™
Spin Touch is connected to a computer via USB, the onboard
Web.
™
uses Bluetooth
®
Connect Desktop application for
®
Connect and unplug the lab.
® . This application is available for free at
™ can be transferred to a water analysis program
®
low energy technology (BLE) to communicate
®
Connect desktop application will need to be
3
and download the
® Connect desktop
®
Connect app from the
®
based PC.
®
www.