WaterLink SpinTouch 3580 Manuel D'utilisation page 14

SETTINGS
Tap to enter the settings menu. Tap
Brightness
Date/Time
Set Language
Calibration
Power
Options
Bluetooth
Market Type
Other Settings
The brightness level of the display can be adjusted from 00 to 10. Tap
and to adjust the brightness. Tap
menu.
The Year, Month, Day, Format, Hour, Minute, AM/PM can be set. Tap
or to adjust the displayed value. Tap
value. After the last value has been chosen (minutes for 24 hour
format, AM/PM for 12 hour format) tap
menu. Tap to exit to the Settings menu at any time.
There are nine language options – English, French, Italian,
Portuguese, Spanish, Chinese, German, Dutch, Swedish. Tap
selection. Tap to exit to the Settings menu.
Tap to run an angle calibration to evaluate the alignment of the hub
and disk. Tap to exit to the Settings menu.
There are three power options: Auto Dim Time, Auto Off Time, and
Power. Tap the options then tap a selection. Tap selection. Tap
exit to the Settings menu.
There are two Bluetooth options: Bluetooth Enabled and Fast Printer
Connect that are used to transfer and print test results. Tap
exit to the Settings menu.
Tap to select the market type. Select Pool/Spa. Tap
Settings menu.
About...lists the Serial Number, Firmware Version, Bluetooth MAC
address, Bluetooth Version and Test Count. The Test Count shows
the number of complete tests that have been performed over the
lifetime of the meter. Tap
to return to the test screen at any time.
to return to the Settings menu.
14
to exit to the Settings
to move to the next
to return to the Settings
to exit to the
to
to