Monostable Outputs (For Appliance Management); Programming The Device; Viewing The Device Settings; Downloading The Device Settings - Bentel Security BGSM-G/AM Mode D'emploi

Monostable Outputs (for appliance management)

Monostable OC outputs can be activated in 2 ways.
1. By sending a case sensitive SMS text message containing the respective Access Code placed between pound (#) signs and Output
Label followed by "=ON" or "=OFF", as follows:
2. By sending a cost-free call from a preset Remote Control number. This Device will activate the output concerned without answering
the call.
, , , , , Monostable OC outputs deactivate (switch OFF) automatically when the programmed ON Time expires.
, , , , , For proper function of this Device, use a 32 K SIM CARD (or higher).
, , , , , Disconnect the telecommunication line before connect the PC to the RS232 port.
This section contains the programming instructions using the BGSM-G Software Application. This programming method requires the
connection of a Null-Modem cable (see Fig. 3) to the RS232 input [10] of this Device and the computer COM port.
Once the Null-Modem cable has been connected, set the computer COM port through the Settings->Serial Port option from the Menu.
'% IHPDOH FRQQHFWRU


WR %*60*



Fig. 3 - Null-Modem cable for programming via PC

Viewing the Device Settings

To view the Device settings on the screen, use the Programming->Load option from the Menu.

Downloading the Device Settings

Once programming has been completed (or an uploaded file containing existing data has been modified), download the data into the
Device, using the Programming->Download option from the Menu.

Preliminary operations

When the application starts, you will be presented with the Main window showing two sections on the left hand side.
z Folders: This section will allow you to click on the various Programming and Control Pages.
z Customers: This section will allow you to delete or retrieve configuration data, as follows:
1. Using the right button on the mouse, click on the Customer's name.
2. Click Load to upload the respective data from the Hard-Disk, or Delete to delete the data configuration.
You can load the configuration data by double clicking the respective name field.
You can list Customers in alphabetical or code order by clicking the heading of the column concerned.
, , , , , To start the configuration of a new Customer, click on File->New Customer then select the device (e.g. BGSM-G) from
the product list in the successive window.
The configuration data is presented on 4 pages, a further 2 pages (Calls and Status) are for "Supervisory and Control" purposes. All the
pages are described in detail in this section.
24
#ACCESSCODE#OUTPUTLABEL=ON
#ACCESSCODE#OUTPUTLABEL=OFF

PROGRAMMING THE DEVICE




'% IHPDOH FRQQHFWRU
 ZLUH VKLHOGHG FDEOH




WR 3&




GSM/GPRS Alarm Communnicator