Publicité
Les langues disponibles
Les langues disponibles
— 1 6 —
F u n c t i o n s o F t h e c r o W n
0
1
2
Normal position
0 —
Date setting
1 —
Time setting
2 —
n o r M a l P o s i t i o n
With the crown in the normal position (0), you can also wind the automatic movement
by hand. A few revolutions of the crown are enough to start the movement. However, it
is better to wind the watch by turning the crown through approximately 20 revolutions
as this will ensure maximum accuracy. The crown must always be in position 0 when
you are wearing your watch.
d a t e s e t t i n g
The date indicator is retrograde, i.e. at the end of the 31st day the hand jumps back
to the first day. If a month has fewer than 31 days, you will need to set the date manu
ally to the first day of the following month. Pull out the crown to position 1. You can
now set the date by turning the crown to the left (rapid advance). You should not use
the rapidadvance function between 8 p.m. and 2 a.m. because the movement auto
matically advances the date during this period.
P o r t u g u e s e t o u r b i l l o n M y s t è r e r é t r o g r a d e
Publicité
