Control Panel; Connecting The Battery - Dustbane Gladiator 464 Manuel D'opération

Control Panel

The functions located on the control panel can be explained as follows:
• A) On-Off main switch of the machine: Main switch to turn on and off the machine.
• B) Led indicator for battery charge: Green for when the machine is charged, red for when the machine is discharged and
yellow for when the machine charge is in reserve or when the machine is being charged.
• C) Display switch: Numeric display switch: pressing this switch, a part from seeing the machine voltage, the display
indicates the working hours of the machine (pressing the switch once) and minutes (pressing the switch twice).
• D) On-Off sweeping mode switches 1 and 2: these two switches allow the machine to work with two separate sweeping
mode: mode 1 for light debris collection and mode 2 for heavy debris collection.
• E) Manual operating switch of the filter shaker: gives the possibility in shaking the filter at any time during work. This is to
be intended as an addition to the automatic filter shaking that cycles every 3 minutes.
• F) Vacuum fan switch: the vacuum fan automatically activates when sweeping mode is on. Therefore the switch is used
when the requirements are to switch off the vacuum fan during sweeping mode.
• G) Numeric display

Connecting the battery

• Remove the top cover to gain access to the battery using the 4 mm hex wrench provided.
• Locate the two Red/Black connectors.
• Align the colors of the connectors.
• Plug the two connector together..
Operations Manual Gladiator 464/664
5