Klarstein VIRTUOSA FLEX 90 Mode D'emploi page 62

EN
Setting the timer to turn one cooking zone off
Touching the heating zone selection control that you
want to set the timer for.
Touch timer control, the "10" will show in the timer
display and the "0" flashes.
Set the time by touching the slider control. (e.g. 6)
Touch timer control again, the "1" will flash.
Set the time by touching the slider control (e.g.9),
now the timer you set is 96 minutes.
When the time is set, it will begin to count down
immediately. The display will show the remaining time
and the timer indicator flash for 5 seconds.
When cooking timer expires, the corresponding
cooking zone will be switched off automatically.
Note: Other cooking zone will keep operating if they are turned on previously.
The red dot next to power level indicator will
illuminate indicating that zone is selected.
62