Klarstein VIRTUOSA FLEX 90 Mode D'emploi page 59

Note: Make sure to place the cookwares centered on the single cooking zone. In
case of oval, rectangular and elongated pans make sure to place the pans centered
on the cooking zone covering both cross .Make sure the cookwares to cover more
than 3/4 area of heating zone. Putting a round pot in the middle region is not
recommended.
Examples of good pot placement and bad pot placement:
As one big zone
To activate the flexible area as a single big zone,
simply press the dedicated keys. The power setting
works as any other normal area.
If the pot is moved from the front to the rear part (or
vice versa), the flexible area detects automatically
the new position, keeping the same power. To add a
further pot, press again the dedicated keys, in order
to detect the cookware.
As two independent zones
To use the flexible area as two different zones with
different power settings, press the dedicated keys.
OR
EN
59