Jackson Grills Supreme JSS550BI-LP Manuel D'utilisation page 8

◼ INSTALL ROTISSERIE KIT: (For Rotisserie Cooking)
1. Carefully remove the rotisserie kit parts from the packaging.
2. Install the motor mounting bracket supplied to the left hand side of the inner hood. (Fig. 4)
3. Install the motor on the motor bracket.
4. Place the forks and counter balance on the rotisserie rod in the desired location.
5. Place the rotisserie rod into the motor. Align the rotisserie rod groove over the right inner hood wall and drop it
into the cut out provided on the inner hood. (Fig.5)
Figure 4
◼ INITIAL CLEAN/WIPE DOWN:
Because we use high polish detailing, there may be some residue from the light oily cleaner we use to take off
the protective plastic residue and masking. These marks can be easily cleaned using a 3M or Sprayway stainless
cleaner and a microfiber cloth, always cleaning in the direction of the stainless steel grain. This is a food safe
cleaner that is non-abrasive and will leave your BBQ gleaming. This cleaner can be used for future regular
cleaning.
WHEN ALL MAIN BURNERS ARE ON THE HIGH POSITION WITH LID
CLOSED, DO NOT TURN ON THE BACK BURNER.
Figure 5
!WARNING!
8
Rotisserie Kit installed