Charging The Udirect 3; Turning The Udirect 3 On And Off - Unitron uDirect 3 Guide Rapide

Charging the uDirect 3

Your uDirect 3 has a non-removable
rechargeable battery.
To charge it:
1. Plug the mini-USB plug into the mini-USB
port on the uDirect 3.
2. Plug the power supply into a power outlet.
During charging, the power indicator is solid
red, this typically takes 90 minutes.
When the battery is fully charged, the power
indicator is solid green.
It is safe to leave the uDirect 3 connected to
the charger overnight.
When charging your uDirect 3 for the first time,
let it charge for at least three hours, even if the
battery indicator is not lit or turns green earlier.
8
A new battery's full performance is achieved only
after three complete charge and discharge cycles.
uTV 3 can also be used as a charging station
™
for uDirect 3.

Turning the uDirect 3 on and off

Slide the power switch
( ) as shown to turn
the uDirect 3 on or off.
Switch the uDirect 3 off
when not in use or if in storage
or during transportation.
For operational use switch the uDirect 3 on.
Off On
9