Unitron uDirect 3 Guide Rapide page 16

Your voice
Caller's voice
Bluetooth
Pairing your mobile phone
1. Enable Bluetooth on your mobile phone
settings menu.
2. Ensure that the uDirect 3 is turned on
and the neckloop is plugged in and worn
correctly. Press the connect (
volume up ( ) buttons at the same time
for two seconds. The audio indicator will
blink blue to indicate pairing mode on the
uDirect 3.
24
Caller's voice
audible here
Wireless signal
) and the
3. Enable Bluetooth pairing mode on your
mobile phone so that a new device can
be added. See manufacturer instructions
for details. If prompted, enter "0000" for
pairing code.
4. If prompted, accept request to grant
uDirect 3 access to your phone book. It is
used for voice calling and caller ID features.
5. Confirmation of successful connection is
indicated on the uDirect 3 when the audio
indicator stops blinking blue. Additionally
a headset symbol ( ) may appear on the
main screen of your mobile phone.
Once pairing is done, your mobile phone
should pair automatically with the uDirect 3.
Please contact your hearing healthcare
professional if you can not complete the
pairing procedure with the steps described.
The pairing process does not require the
neckloop to be plugged in. For streaming
and Bluetooth connection, the neckloop is
mandatory.
25