Tilt Support Lever For Power Trim And Tilt Model; Cowling Lock Lever; Flushing Device - Yamaha F115 Manuel De L'utilisateur

Components
A
Bolt tightening torque:
42 N·m (4.28 kgf·m, 31.0 lb·ft)
EMU26342
Tilt support lever for power trim and
tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
1. Tilt support lever
ECM00661
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to secure
it in the tilt position.
34
EMU40762

Cowling lock lever

The cowling lock levers are used to secure
the top cowling.
B
ZMU08077
1. Cowling lock lever
1
1. Cowling lock lever
EMU40803

Flushing device

The flushing device is used to clean the cool-
ZMU08078
ing water passages of the outboard motor
using a garden hose and tap water. For in-
structions on using the flushing device, see
page 78.
1
ZMU08079
1
ZMU08080