Spectrum-Analyzer Hm5530; Specifi Cations - Hameg Instruments Hm5530 Manuel

3 GHz Spectrum Analyzer HM5530
All data valid at 23 °C after 30 minute warm-up
Frequency characteristics
Frequency range: 100 kHz...3 GHz
Frequency generation: TXCO with DDS
(Digital Frequency Synthesis)
Stability: ± 1 ppm
Aging: ± 1 ppm/year
Frequency resolution: 1 kHz (6
Center frequency range: 0...3 GHz
Tolerance of center frequency: ±1 kHz
Span setting range: 0 (zero span) and 1...3000 MHz
Amplitude characteristics
Display range: -110 dBm...+20 dBm
Scaling, units: 10 or 5 dB/div, selectable dBm, dBmV,
dBμV
Dynamic range: 80 dB (10 dB/div), 40 dB (5 dB/div)
Amplitude frequency response (ATT 10 dB, zero span, 1 MHz-RBW signal
level -20 dBm): ±3 dB
Display (CRT): 8 div. x 10 div.
Display chracteristic: logarithmic
Display units: dB (dBm, dBmV, dBμV)
Input attenuator: 0...50 dB in 10 dB increments
Tolerance of input attenuator: ± 2 dB relative to 10 dB position
Maximum continuous input level:
Attenuation 10...50 dB: +20 dBm (0.1 W)
Attenuation 0 dB: +10 dBm
Maximum input dc voltage: ± 25 V
Reference level:
Adjustment range: -110 dBm...+20 dBm
Tolerance (1500 MHz, ATT 10 dB,
Zero Span, RBW 1 MHz): ± 1 dB
Min. average noise level (RBW 9 kHz):
150 kHz...1.5 MHz: -90 dBm
1.5 MHz...2.6 GHz: -100 dBm
2.6 GHz...3.0 GHz: -90 dBm
3rd order intermodulation:
2 signals of –33 dBm each,
frequency difference › 3 MHz: › 75 dBc
Harmonic distortions (2nd harmonic at a signal level of -30 dBm, ATT 0 dB,
frequency difference › 3 MHz): › 75 dBc
Bandwidth dependent Amplitude error rel. to
RBW 1 MHz, Zero Span: ± 1 dB
Digitization: ±1 Digit (0.4 dB) at 10 dB/div
scaling (average, zero span)
Marker/Deltamarker
Frequency resolution: span/2000, max. 1 kHz, 6
Frequency accuracy: ± (1 kHz + tolerance of center frequency
+ 0.02% x span)
Amplitude resolution: 0,4 dB, 3
Bandwidths
Resolution bandwidths (RBW) at -6 dB: 1 MHz, 120 kHz, 9 kHz
Videobandwidth (VBW): 50 kHz, 4 kHz
with automatic selection of sweep time:
40, 80, 160, 320 and 1000 ms
Inputs/Outputs
Measuring input: N connector
Input impedance: 50 Ω
VSWR (ATT 10 dB): typ. 1,5 : 1
Testsignal output: N connector
Output impedance: 50 Ω
Frequency: 50 MHz ± 1 kHz
Level: -10...0 dBm (in 0.2 dB-increments)
± 3 dB @ 0 dBm
Accuracy of level:
Supply voltage
for field probes 6 V
(2.5 mm DIN jack)
1 ⁄ -digit readout)
2
1 ⁄ -digit
2
1 ⁄ -digit
2
, max. 100 mA
DC
Audio output (Phone): 3.5 mm DIN jack
RS-232 interface: 9-pin. sub-D
External trigger input: BNC connector
Digital signal:
Low level: 0...+0,8 V
High level: +2.5 V...+5.0 V
Functions
Keyboard input: Center frequency, span, start frequency,
stop frequency, marker, delta marker,
reference level, test signal level
Rotary encoder input: Center frequency, span, start frequency,
stop frequency, marker, delta marker,
reference level, test signal level intensity,
focus, trace rotation, volume
Max. Hold Detection: Peak Value Acquisition
Quasi-Peak Detection:* Quasi-Peak Valuation
AVG (average): Averaging
Reference spectrum: memory depth 2 k x 8 Bit
SAVE/RECALL: Storage and recall of up to
10 instrument settings
AM demodulation: for the PHONE output
REMOTE: Display of remote/local control
via RS-232 interface
Readout: 8 parameter display fields, display of key
board inputs
Miscellaneous
Display (CRT): D 14-363GY, 8 div. x 10 div. internal graticule
Acceleration voltage: approx. 2 kV
Trace rotation: adjustable on front panel
Power supply: 105/254 V
approx. 37 W CAT II
Safety class: I (EN/IEC 61010-1) with protective earth
Operating temperature: +5°C...+40°C
Storage temperature: -20°C...+70°C
Max. rel. humidity: 5%...80% (non condensing)
Dimensions (W x H x D): 285 x 125 x 380 mm Adjustable handle, as
a tilt-stand or for convenient carrying
Weight: approx. 6.5 kg
*) in combination with software AS300E
Accessories supplied: Line cord, manual, CD-ROM, HZ21 Adapter N male to
BNC female
Optional accessories:
HO720 Dual-Interface USB/RS-232
HZ70 Opto-Interface (with optical fiber cable)
HZ520 Antenna
HZ540/550 Near Field Probe sets
HZ560 Transient Limiter
HZ575 75 /50 -Ω-converter
S p e c i f i c a t i o n s
, 50...60 Hz,
AC
Subject to change without notice
23