Safety Information; Symbols Used In The Instructions; Symbols On The Device; General Safety Instructions For Power Tools - Parkside PHA 12 A1 Traduction Des Instructions D'origine

working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).

Safety information

This section describes the basic safety rules
when working with the device.
Symbols used in the
instructions
Hazard symbol with infor-
mation on the prevention of
personal injury or property
damage.
Hazard symbol with information on
damage prevention.
Advisory symbol with information on
how to best use the device.

Symbols on the device

Attention!
Read the operating instructions care-
fully before using the device.
Wear safety goggles.
Wear a respiratory mask.
Wear safety gloves.
Direction of travel of planer blade
The device is part of the Park-
side X 12 V TEAM series
General Safety Instructions
for Power Tools
WARNING! Read all
safety notices, instruc-
tions, illustrations and
technical data that have
been provided with this
power tool. Failure to com-
ply with these and the follo-
wing instructions may result
in electric shock, fire and/or
serious injuries.
Save all safety instructions
and guidelines for the fu-
ture.
The term "power tool" used in
the safety instructions refers to
mains-operated power tools
(with a mains cable) and to
battery-operated power tools
(without a mains cable).

1) Occupational Safety

a) Keep your work area
tidy and well lit. Wor-
king in areas that are untidy
or without lighting can result
in accidents.
b) Do not work with the
power tool in a poten-
tially explosive atmo-
sphere where flam-
mable liquids, gases or
dust are present. Power
tools generate sparks that
can ignite dust or vapours.
c) Keep children and other
persons away from the
area while the power
tool is in use. Distractions
GB IE
19