Presentation And General Points; General Points; Transport And Packaging; Identification Label - Errebi ALFA-COMBI Notice D'utilisation

1

Presentation and general points

1.1 GENERAL POINTS

The ALFA-COMBI key cutting machine has been desig-
ned taking into account the safety standards currently
in force in the EU.
The safety or personnel involved in the handling of this
type of machines is only achieved with a well designed
worker safety program, the implementation of a main-
tenance program and following recommended advice
as well as compliance with the safety standards included
in this manual.
Although the machine is not difficult to install, it is best
not to try to install, adjust or use it without first having
read this manual.
The machine leaves our factory ready for use and only
requires the carrying out of calibration operations for
the tools that are going to be used.

1.2 TRANSPORT AND PACKAGING

The machine comes packed in packing of the following
size:
Width = 570 mm, length = 520 mm, height = 410mm
Weight of machine plus packing = 20 Kg.
When the machine has been unpacked, check whether
it has suffered any damage during transportation. If
you find any problems, please inform the carrier imme-
diately and do not do anything with the machine until
the carrier's agent has carried out an inspection.

1.3 IDENTIFICATION LABEL

The ALFA-COMBI key cutting machine has an identifi-
cation label, giving the serial number, the name and
address of the manufacturer, the CE mark and the year
of manufacture.
2

Machine characteristics

The ALFA-COMBI key cutting machine is very robust,
which has a direct effect on its precision.
It can cut single and double blade mortise lock keys,
pump keys and special keys. Three-position reversible
double clamp system. The clamps have two special gui-
des for precise centring and a tracer point with micro-
metric adjustment.
The ALFA-COMBI machine can cut the following types of
keys:
Single and double blade mortise lock keys.
Pump keys.
Special keys.
Standard
Abloy
1
Head
2
Stem
3
Blade
4
Teeth
See Figure 1.
In order to get a fuller service from this key cutting machine,
it is possible to fit to the machine any of the four slides descri-
bed below, and use any of them.
"MORTISE" SLIDE (ALFA-COMBI)
Enables you to cut single or double blade mortise lock keys,
pump keys and special keys.
"FORD" SLIDE (ALFA-FD)
Enables you to cut, using a code, FORD TIBBE keys.
"ABLOY" SLIDE (ALFA-ABL)
Enables you to cut ABLOY type keys.
"GROOVES" SLIDE (ALFA-RG)
ENGLISH

2.1 FAMILY OF KEYS

Ford
2.2 PARTS OF THE KEYS
See Figure 2.

2.3 OPTIONAL FITTINGS

7 <<<
<<< <<<