General Safety Instructions; Machine-Related Safety Instructions - Festool TS 75 EBQ Notice D'utilisation D'origine

Original operating manual
1 Symbols ............................................... 13
2 Safety instructions ............................... 13
3 Intended use ........................................ 15
4 Technical data ...................................... 15
5 Operation ............................................. 15
6 Settings ................................................ 16
7 Working with the machine................... 17
8 Accessories.......................................... 17
9 Service and maintenance .................... 18
10 Environment......................................... 18
11 EU Declaration of Conformity.............. 19
The specified illustrations appear at the beginning
of the Operating Instructions.
1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of with domestic waste.
Tip or advice
Handling instruction
2 Safety instructions
2.1

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
2.2

Machine-related safety instructions

Cutting procedures
a. DANGER! Keep hands away from cutting
area and the blade. Keep your second hand on
auxiliary handle, or motor housing.
hands are holding the saw, they cannot be cut by
the blade.
b. Do not reach underneath the workpiece. The
guard cannot protect you from the blade below
the workpiece.
c. Adjust the cutting depth to the thickness of the
workpiece. Less than a full tooth of the blade
teeth should be visible below the workpiece.
d. Never hold piece being cut in your hands or
across your leg. Secure the workpiece to a sta-
ble platform. It is important to support the work
properly to minimize body exposure, blade bind-
ing, or loss of control.
e. Hold the power tool by insulated gripping sur-
faces only, when performing an operation
where the cutting tool may contact hidden wir-
ing or its own cord. Contact with a "live" wire will
also make exposed metal parts of the power tool
"live" and could give the operator an electric
shock.
f. When ripping, always use a rip fence or straight
edge guide. This improves the accuracy of cut
and reduces the chance of blade binding.
g. Always use blades with correct size and shape
(diamond versus round) of arbour holes. Blades
that do not match the mounting hardware of the
saw will run eccentrically, causing loss of control.
h. Never use damaged or incorrect blade washers
or bolt. The blade washers and bolt were spe-
cially designed for your saw, for optimum perfor-
mance and safety of operation.
i.Wear suitable protective equip-
ment such as ear protection,
safety goggles, a dust mask for
work which generates dust, and
protective gloves when working
with raw materials and when
changing tools.
Kickbacks causes and related warnings
– kickback is a sudden reaction to a pinched, bound
or misaligned saw blade, causing an uncon-
TS 75
GB
If both
13