Service And Maintenance - Festool TS 75 EBQ Notice D'utilisation D'origine

TS 75
GB
8.1 Parallel stop, table widener
A parallel stop can be used for section widths up to
180 mm. The parallel stop can also be used as a ta-
ble widener.
8.2 Guide system
The guide rails, which are available in different
lengths, allow for precise, clean cuts and simulta-
neously protect the workpiece surface against
damage.
In conjunction with the extensive range of accesso-
ries, exact angled cuts, mitre cuts and fitting work
can be completed with the guide system. The option
of attaching the guide rail securely using clamps
[6-4] ensures safer working conditions.

Adjust the guide play between the saw table and
the guide rail using the two adjustable jaws [1-
3].
Bed in the splinterguard [1-4] before using the
guide rail for the first time:

Set the machine speed to 6.

Place the machine at the rear end of the guide
rail together with the complete guide plate.

Switch on the machine.

Push down the machine slowly to the max. pre-
set cutting depth and cut along the full length of
the splinterguard without stopping.
The edge of the splinterguard now corresponds ex-
actly to the cutting edge.
8.3 Multifunction table
The mutifunction table MFT/3 makes clamping the
workpiece easy and allows you to saw large and
small workpieces safely and precisely using the
guide system. Its many fields of application make
economical and ergonomically convenient work
possible.
8.4 Saw blades, other accessories
In order to saw different materials quickly and
cleanly, Festool offers saw blades for all applica-
tions that are specially designed for your Festool
portable circular saw.
18
9

Service and maintenance

WARNING
Risk of injury, electric shock

Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!

All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at: www.festool.com/service
EKAT
Use only original Festool spare parts!
4
Order No. at: www.festool.com/service
5
3
2
1
The machine is equipped with special carbon
brushes. If they are worn, the power is interrupted
automatically and the machine comes to a stand-
still.
Observe the following instructions:

To ensure constant air circulation, always keep
the cooling air openings in the housing clean
and free of blockages.

Use an extractor on all the openings of the ma-
chine to remove wood chips and splinters.
10 Environment
Do not dispose of the device in house-
hold waste! Recycle devices, accesso-
ries and packaging. Observe applica-
ble national regulations.
EU only: In accordance with European
Directive on waste electrical and electronic equip-
ment and implementation in national law, used
electric power tools must be collected separately
and handed in for environmentally friendly recy-
cling.
Information on REACh: www.festool.com/reach