Dometic RTX1000 Notice D'utilisation page 12

Operation
6.4 Display
The display has the following indicators:
No. in
fig. 4, page 5
1
2
3
4
5
6
7
8
9
10
I
NOTE
You can find full details of the display messages in the chapter "Display
messages" on page 20.
12
Description
The symbol shows the current menu selected (see chapter "Using
menus" on page 15).
Depending on the current menu, shows:
• the required temperature
• the current fan speed
• the remaining running time of the timer
Shows the current fan speed.
Setting: Lights up when the setting menu has been activated.
ERROR: Lights up when the supply voltage falls below a set value.
Additionally the display flashes.
Battery: Displays problems with the supply voltage.
°C: Lights up when the temperature is shown in °C.
°F: Lights up when the temperature is shown in °F.
SET: Indicates that the set temperature is being shown.
MIN: Lights up when the timer has been set.
Shows the current mode (see chapter "Menu mode" on page 16)
RTX1000/2000, SPX1200
EN