Ribimex Ribiland PRBVB2800 Manuel D'instructions Et D'utilisation page 16

Cutting diameter adjustment
Disconnect product from its power source before maintenance, cleaning or any
intervention on product; when you do not use product or when you leave it
unattended for any period.
Disconnect product from its main power source, if product, power cable, or
extension cord is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information for
its safe disposal.
3.2- General safety instructions
Read the instructions carefully. Be familiar with the controls and the proper use of the appliance
- For safe operation
1. Never operate this product when you are fatigued, ill, or upset, or under the
influence of medication that may make you drowsy, or if you are under the
influence of alcohol or drugs.
2. Wear personnel protective equipment: gloves; safety footwear, snug fitting
clothing, goggles or face protection, hearing and head protection devices.
Use vibration-proof gloves.
3. Never allow people unfamiliar with these instructions to use the appliance. Local
regulations may restrict the age of the operator.
Never operate the appliance while people, especially children, or pets are nearby.
Do not start or use the product when persons are nearby.
Keep bystanders (esp. children) and animals out of the work area. Children, pets
and bystanders should be kept away when you start or operate the product
Keep children away.
The use of this product by children is forbidden.
Keep the product away from children or from their environment.
Never allow unsupervised children to operate the appliance. Children should be
supervised to ensure that they do not play with the product.
Never leave the product unattended especially when children are nearby.
4. Never start working until you have a clear work area, and secure footing,
5. -
6. Keep all parts of your body away from the feeding opening when the engine is running.
7. Before you start the product, make sure the product is properly assembled and that insertion
chamber is not obstructed.
8. All product service, other than the maintenance listed in the Instructions Manual,
should be performed by competent service personnel.
9. Always switch off the engine before carrying any intervention.
10. Do NOT expose to and do not use during bad weather conditions: never work in
bad weather (e.g. rain, storm, snow, high wind ...), never work when visibility is
poor or in very high or low temperatures. Never leave product outdoors under the
rain.
11. Keep the handles dry, clean and free of grease, oil or fuel.
Page 16 / 35