The Heat Setting; Bridge Function; Power Function; Automatic Heat Up - Electrolux EHI8742FOK Notice D'utilisation

• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deacti-
vates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•
, - — 6 hours
•
- — 5 hours
•
- — 4 hours
•
- — 1.5 hours

3.3 The heat setting

Touch the control bar at the heat setting.
Change clockwise or counterclockwise, if it
is necessary. Do not release before you
have a correct heat setting. The display
shows the heat setting.

3.4 Bridge function

The Bridge function connects two cooking
zones and they operate as one.
First set the heat setting for one of the
cooking zone.
To activate the Bridge function touch
To set or change the heat setting touch
one of the control sensors.
To deactivate the Bridge function touch
. The cooking zones operate independent-
ly.

3.5 Automatic Heat Up

You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
diagram), and then decreases to the nec-
essary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1.
Touch
play).
2. Immediately touch the necessary heat
setting. After 3 seconds
in the display.
To stop the function change the heat set-
ting.
12
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14

3.6 Power function

The Power function makes more power
available to the induction cooking zones.
The Power function is activated for 10 mi-
nutes at most. After, that the induction
cooking zone automatically sets back to
highest heat setting. To activate, touch
, comes on. To deactivate, touch a heat
setting -
3.7 Power management
The power management divides the power
between two cooking zones in a pair (see
the illustration). The power function increa-
.
ses the power to the maximum level for
one cooking zone in the pair. The power in
the second cooking zone automatically de-
creases. The heat setting display for the re-
duced zone changes between two levels.
ENGLISH
( comes on in the dis-
comes on
.
7