Residual Heat Indicator; Daily Use; The Heat Setting; Activation And Deactivation Of The Outer Ring - Electrolux EHF3320FOK Notice D'utilisation

3.2 Heat setting displays
Display
-
-

3.3 Residual heat indicator

WARNING!
heat!

4. DAILY USE

WARNING!
Refer to the Safety chapters.
4.1 Activation and deactivation
Touch
activate the appliance.
4.2 Automatic Switch Off
The function deactivates the
appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sound some time and
the appliance deactivates. Remove the
object or clean the control panel.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
deactivates. See below.
All manuals and user guides at all-guides.com
The cooking zone is deactivated.
The cooking zone operates.
The
The Automatic Heat Up function operates.
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
The Automatic Switch Off operates.
The risk of burns from residual
for 1 second to activate or de-
comes on and the appliance
Description
function operates.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•
,
•
-
•
— 4 hours
•
-

4.3 The heat setting

Touch
Touch
The display shows the heat setting. Touch
and
the cooking zone.
4.4 Activation and deactivation
of the outer ring
You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring touch the sen-
sor field
Do the procedure again to deactivate the
outer ring. The indicator goes out.
ENGLISH
- — 6 hours
— 5 hours
— 1.5 hours
to increase the heat setting.
to decrease the heat setting.
at the same time to deactivate
. The indicator comes on.
21