Setting The Heat Setting; Locking/Unlocking The Control Panel; Turning The Stop+Go Function On And Off; Using The Automatic Warm-Up Function - Electrolux 98031KF-SN Notice D'utilisation

46 Operating the appliance

Setting the heat setting

To set the heat
setting
Switch off

Locking/unlocking the control panel

The control panel, with the exception of the "On/Off" sensor field, can be locked at any time
in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
To switch on
To switch off
When you switch the appliance off, the locking function is automatically switched off.

Turning the STOP+GO function on and off

The STOP+GO function simultaneously toggles all active cooking zones to keep-warm mode
then back to the heat setting they were at before
To switch on
To switch off
STOP+GO does not stop timer functions.
STOP+GO controls the entire control panel apart from the sensor field

Using the automatic warm-up function

All cooking zones are equipped with an automatic warm-up function. When setting a heat
setting using the automatic warm-up function, the cooking zone switches to full power
for a certain amount of time and then automatically switches back to the heat setting set.
Step Control panel
1.
Touch
2. Move your finger down
from
desired heat setting be-
tween
The length of time that the automatic warm up function operates depends on the heat
setting selected.
All manuals and user guides at all-guides.com
Control panel
Touch the desired heat setting, if necessary, correct
to the left or the right
Touch
Control panel
Touch
previously set heat setting
Touch
Control panel
Touch
Previous heat setting (not automatic warm-up or power
Touch
function)
/
to select the appliance works at full power. After the automatic warm up is
completed, the heat setting
and
Display
(for 4 seconds)
Display
Display
after 5 seconds . As long as
/
Display
/ to
.
is displayed, the
is displayed again.