Product Description; Cooking Surface Layout; Control Knob; Residual Heat - Electrolux EHS6940HOW Notice D'utilisation

6 www.electrolux.com
• Cut off the mains cable and discard it.

3. PRODUCT DESCRIPTION

3.1 Cooking surface layout

1

3.2 Control knob

Symbol Function
0
1 - 6

4. DAILY USE

WARNING!
Refer to Safety chapters.

4.1 Before first use

Put cookware containing water on each
cooking zone, set the maximum position
and operate the hob for 10 min. This is to
burn off the residue in the appliance. After
that, operate the hob at minimum position
for 20 min. During this period, an odour
and smoke can occur. This is normal.
Make sure that the airflow is sufficient.
4.2 Using the rapid hot plate
A red dot in the middle of the plate shows
a rapid hot plate. A rapid hot plate heats

5. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
1 1
180 mm 180 mm
145 mm 145 mm
3 2
Off position
Heat settings
Cooking zone
1
Control knobs
2
Power indicator
3
1

3.3 Residual heat

WARNING!
There is a risk of burns from
residual heat.
up faster than usual plates. The red dots
are painted on the plates. They can
deteriorate during use and even disappear
completely after a period of time. It does
not have an effect on the performance of
the hob.

4.3 The heat setting

To set or change the heat setting turn the
knob to the correct heat setting. To
deactivate turn the knob to off position.
Power indicator activates when one or
more cooking zones are activated. When
you deactivate the cooking zones the
indicator deactivates.