Automatic Switch-Off - Electrolux 98031KF-SN Notice D'utilisation

50 Operating the appliance
Step
2.
Touch
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
Step
1.
Select a cooking zone
2.
Touch
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Displaying the time remaining for a cooking zone
Step Control panel field
1.
Select a cooking zone
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
1.
Touch
Acoustic signal stops.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking surface automatically switches itself off.
• If one or more sensor fields are covered by objects (a pan, etc.) for longer than approx.
10 seconds, a signal sounds and the cooking surface switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically switches itself
off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor fields on the control
panel are covered for more that 10 seconds, an acoustic signal sounds. The acoustic
signal switches itself off automatically when the sensor fields are no longer covered.
Induction cooking zones
• In the case of overheating (e.g. when a saucepan boils dry) the cooking zone automat-
ically switches itself off.
be set to
• If cookware that is not suitable is used,
the display for the cooking zone switches itself off.
All manuals and user guides at all-guides.com
Control panel
Control panel
or
Control panel field
is displayed. Before being used again the cooking zone must
and allowed to cool.
The time remaining counts backwards to
Pilot light of the selected cooking zone
flashes more quickly
Remaining time is displayed
01 99
to
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
Acoustic signal to acknowledge.
lights up in the display and after 2 minutes
Display
00
Display
minutes
Display
Acoustic signal
.