Klarstein VIRTUOSA SLIDE Mode D'emploi page 35

Setting the timer to turn one cooking zone off
1 Touching the heating zone selection control that you want to set the timer for. (e.g.
zone 2#).
2 Touch timer control , The minder indicator will start flashing and [30] will show in
the timer display.
3 Set the time by touching the [-] or [+] control, the minute minder indicator will
start flashing and will show in the timer display. Touch the [-] or [+]control once to
decrease or increase by 1 minute. Hold the [-] or [+] control of the timer to decrease
or increase by 10 minutes. If the setting time exceeds 99 minutes, the timer will
automatically return to 0 minute.
4 Touching the heating zone selection control, and then touch the [Timer], the timer is
cancelled, and the [--] will show in the minute display.
5 When the time is set, it will begin to count down immediately. The display will show
the remaining time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
6 When cooking timer expires, the corresponding cooking zone will be automatically
switch off and show [H].
EN
35