Ii.2. Space Required; Ii.3. Positioning - Vortice VORT NRG ECR Notice D'emploi Et D'entretien

ENGLISH

II.2. Space required

Generally a space at least equal to dimension should be left free for maintenance access.
Ø A B
Model
mm mm mm
500 200 900 570
800
250 1080 700
1500 315 1400 750
2000 355 1500 830
2700 400 1610 920
3500
450 1730 1085
II.3. Positioning the unit
The system must be supported on a sufficiently rigid surface (use a vibration damping mounts if necessary). For ductwork
connections, select duct sections to suit the dimensions of the flexible hoses, which should be properly tensioned. The ducts
should be insulated and the first accessories should be installed at a distance of 2.5 times the duct diameter from the unit
(T junction, etc.). Install the unit in such a way that internal components cannot be damaged by bad weather or ambient
temperature either during the installation or subsequent use of the unit.
1
C D E E1
mm mm mm mm
970 145 205 195
1090 170 235 240
1140 30 315 310
1220 250 335 330
1420 270 375 345
1420 300 365 370
INTERIOR USE
E2 F F1 G
mm mm mm mm
205 135 155 385
260 60 235 485
315 210 190 585
335 230 230 660
375 250 285 755
400 275 390 795
BASIC
J J1 L
FIRST
mm mm mm kg
75 130 520 130
75 180 650 170
100 230 720 225
100 230 720 270
100 230 820 345
100 305 980 420
PREMIUM BE
PREMIUM BC
kg
135
175
232
78
255
432
Supply air
Exhaust air