Technical Data; Safety Instructions - DeWalt DW718 Mode D'emploi

E N G L I S H
MITRE SAW DW718/DW718V/DW718XPS
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical Data

Voltage V
(U.K. & Ireland only)
Power input
Blade diameter
Blade bore
Blade body thickness
Max. blade speed
Max. cross-cut capacity 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 94 mm
Resulting height at max. width 345 mm
45° mitre left
Resulting width at max. height 94 mm
Resulting height at max. width 241 mm
45° mitre right
Resulting width at max. height 94 mm
Resulting height at max. width 241 mm
45° bevel left
Resulting width at max. height 61 mm
Resulting height at max. width 345 mm
45° bevel right
Resulting width at max. height 43 mm
Resulting height at max. width 345 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 168 mm
Automatic blade brake time
Weight
* DW718V with laser, DW718XPS with worklight LED
L (sound pressure)
pA
L (acoustic power)
WA
K (sound pressure uncertainty)
pA
K (acoustic power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
Fuses:
Europe
U.K. & Ireland
U.K. & Ireland
26
WALT one of the most reliable
E
DW718/DW718V/
DW718XPS
230
V 230/115
W 1,600
mm 305
mm 30
mm 1.8
-1
min 1,700–3,400
mm 345
mm 241
mm 90
mm 56
left 60°
right 50°
left 48°
right 48°
mm 328
mm 74
mm 231
mm 74
mm 231
mm 74
mm 328
mm 48
mm 328
mm 28
mm 23
s < 10.0
kg 20.5*
dB(A) 88
dB(A) 101
2.8
dB(A)
dB(A) 2.8
m/s² < 2.5
m/s² 1.5
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result
in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of conformity
DW718/DW718V/DW718XPS
D WALT declares that these products, described under "technical data" have
E
been designed in compliance with:
98/37/EC (until Dec.28,2009); 2006/42/EC (from Dec.29,2009);
2004/108/EC; 2006/95/EC; EN 61029-1:2000 + A11:2003 + A12:2003;
EN 61029-2-9:2002; EN 55014-1; EN 55014-2; EN 61000-3-2;
EN 61000-3-3.
For more information, please contact D
refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany

Safety Instructions

WARNING! When using electric tools basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and personal injury including the following.
Read all these instructions before attempting to operate this product and
save these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE
General Safety Rules
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose the tool to rain. Do not use the tool in damp or wet
conditions. Keep the work area well lit (250 - 300 Lux). Do not use
the tool where there is a risk of causing fire or explosion, e.g., in the
presence of flammable liquids and gases.
3. Guard against electric shock.
Avoid body contact with earthed surfaces (e.g., pipes, radiators,
cookers and refrigerators). When using the tool under extreme
conditions (e.g., high humidity, when metal swarf is being produced,
etc.), electric safety can be improved by inserting an isolating
transformer or a (FI) earth-leakage circuit-breaker.
WALT at the following address or
E
WALT.
E