Technical Data; Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt D27107 Traduction De La Notice D'instructions Originale

E N G L I S H
FLIP-OVER SAW D27107, D27107XPS
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical data

Voltage
Type
Power input
Power output
Max. blade speed
Blade diameter
Blade bore
Blade body thickness
Riving knife thickness
Automatic blade brake time
Weight
Cutting capacities
Mitre saw mode
Mitre (max. positions)
Bevel (max. positions)
Max. crosscut capacity at 90°/90°
Max. mitre cut capacity at 45°
Max. depth of cut 90°
Max. depth of bevel cut 45°
Max. depth of cut at 45° bevel, 45° mitre
Saw bench mode
Max. ripping capacity left/right
Depth of cut at 90°
Depth of cut at 45°
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
38
WALT one of the most reliable
E
D27107 D27107XPS
V 230 230
3 1
(D27107 with
worklight LED)
W 2000 2000
W 1080 1080
min -1 4000 4000
mm 305 305
mm 30 30
mm 2.1 - 2.2 2.1 - 2.2
mm 2.5 2.5
s < 10 < 10
kg 42 42
left 48° 48°
right 48° 48°
left 48° 48°
right 2° 2°
mm
205 x 63 205 x 63
mm 160 160
mm 90 90
mm 60 60
mm 60 60
mm 120/320 120/320
mm 81 81
mm 56 56
dB(A) 95.0 95.0
dB(A) 3.0 3.0
dB(A) 106.0 106.0
dB(A) 3.0 3.0
m/s² 2.1 2.1
m/s² 1.5 1.5
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses:
Europe
U.K. & Ireland
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.28 Ω at the
interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
D27107/D27107XPS
D WALT declares that these products described under Technical Data are
E
in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-11.
These products also comply with Directive 2004/108/EC and 2011/65/EU.
For more information, please contact D
refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
01.12.2011
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
WALT at the following address or
E
WALT.
E