Installation Instructions; Before You Begin - GE Appliances Zoneline 4100 Manuel D'utilisation Et Instructions D'installation

Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737)

BEFORE YOU BEGIN

Read these instructions completely and carefully.
IMPORTANT –
•
local inspector's use.
IMPORTANT –
•
codes and ordinances.
Note to Installer –
•
instructions with the owner.
Note to Owner –
•
future reference.
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
AIR CONDITIONER BREAK-IN PERIOD
NOTE – As with any mechanical device with moving parts,
this unit will have a wear-in period. AFTER INSTALLATION,
this unit should be operated for 48 hours to achieve
optimum efficiency.
TOOLS YOU WILL NEED
ZONELINE COMPONENTS
Appearance may vary.
Exterior grille/louver**
** Shipped with the Zoneline unit
** Check the "Essential Elements" list on the unit located on front of the base pan
Save these instructions for
Observe all governing
Be sure to leave these
Keep these instructions for
Phillips screwdriver
Wall case**
Conditioners
or
Visit our Website at:
IMPORTANT ELECTRICAL
SAFETY—READ CAREFULLY
CAUTION:
• Follow the National Electrical Code (NEC) or local
codes and ordinances.
• For personal safety, this Zoneline must be properly
grounded.
• Protective devices (fuses or circuit breakers)
acceptable for Zoneline installations are specified
on the nameplate of each unit.
• Do not use an extension cord with this unit.
• Aluminum building wiring may present special
problems—consult a qualified electrician.
• When the unit is in the OFF position, there is
still voltage to the electrical controls.
• Disconnect the power to the unit before
servicing by:
1 Removing the power cord (if it has one) from
the wall receptacle.
OR
2 Removing the branch circuit fuses or turning
the circuit breakers off at the panel.
Zoneline unit
Room cabinet*
11
Zoneline Air
GEAppliances.com
Power supply kit**