Installing The Projectors Using The Su-Pj2000 Projector Stand - Sony VPL-X2000U Manuel D'installation

Installation Examples

Installing the Projectors Using the SU-PJ2000 Projector Stand

When installing the projectors using the SU-PJ2000
projector stand for stacking, install the projectors
following the installation measurements below.
Available screen size for stacking
When attaching the VPLL-Z2019, VPLL-Z2025 and
VPLL-Z2039 lens (not supplied), 80 to 500-inches
screens are available for twin stack installation, and
100 to 500-inches screens are available for triple stack
installation.
Notes
• If the VPLL-2009, VPLL-2014 or VPLL-2075
optional lens is mounted, you cannot perform stack
installation.
• For safety and maintenance purposes, install the
projectors away from the wall. Leave a minimum
7
space of 30 cm (11 / inches) from both sides and a
8
minimum space of 70 cm (27
rear.
Floor installation
Wall
x
a: distance between the screen and the center of the lens
c: distance between the floor and the bottom of the 1st projector stand
x: distance between the center of the screen and the bottom of the 1st projector stand
34
(GB)
5
/ inches) from the
8
Center of the screen
a
For details on how to install the SU-PJ2000 projector stand,
refer to the installation manual supplied with the SU-
PJ2000 projector stand.
Note on stacking
To properly align the pictures from both projectors,
set the zoom to the center of the adjustment range.
1 Install the projector following the "a" value in the
stacking example.
2 Use the zoom to align the pictures from the first
and second projectors so that they fill the screen.
Center of the lens
2nd projector
SU-PJ2000 projector
stand
1st projector
c
Floor