Installing The Projector On The Floor - Sony VPL-X2000U Mode D'emploi

Installing the Projector on the Floor

Horizontal center of the screen
The distance between the lens and the screen varies
depending on the size of the screen and the attached
lens. Use the tables on pages 35 (GB) to 37 (GB).
This section describes the installation arrangements for installing the
projector on the floor. For details on installation examples, see pages 34
(GB) to 37 (GB).
For ceiling installation, consult with qualified Sony personnel (see page 38
(GB)).
Install the projector so that the tip of the lens is within this area.
Vertical center
of the screen
Installation
area
Projection
distance
Adjust the vertical and horizontal positioning of the
projector.
Vertical positioning (side view)
Screen
You can adjust the angle of projection by performing
the shift adjustment (page 23 (GB)).
• Install the projector so that the center of the lens is
between just above the bottom edge of the screen
and the center of the screen.
• When using the VPLL-2009, make sure that the
center of the lens is aligned with the vertical center
of the screen.
Horizontal positioning (top view)
Screen
38 mm (1
Adjust the horizontal positioning of the projector so
that the center of the lens is aligned with the
horizontal center of the screen.
Adjustable range
Center of the projector
1 / inches)
2
Center of the lens
19
(GB)