Table des Matières
Publicité
1. Arrow mark
1. Flèche
1. Marca en forma
1. Tapered nut
1. Écrou conique
1. Tuerca cónica
Wheel installation
When installing the wheel, reverse the removal
procedure.
NOTE:
The arrow mark
ward the rotating direction of the wheel.
1. Tapered wheel nuts are used for both
front and rear wheels. Install the nut with
its tapered side towards the wheel.
2. Tighten the wheel nuts to the specified
torque.
Wheel nut torque:
Front: 55 Nm (5.5 m·kg)
Rear: 55 Nm (5.5 m·kg)
8-109
on the tire must point to-
EBU00702
Publicité
Chapitres
Table des Matières
Dépannage
