1. Bolt (× 2)
1. Boulon (× 2)
1. Perno (× 2)
1. Final gear oil drain bolt
1. Boulon de vidange d'huile de transmission finale
1. Perno de drenaje de aceite del engranaje final
3. Install the oil filler bolt and tighten to the
specified torque.
Tightening torque:
Oil filler bolt:
23 Nm (2.3 m·kg)
Final gear oil replacement
1. Remove the final gear case cover.
2. Place the machine on a level place.
3. Place a container under the final gear
case.
4. Remove the oil filler bolt and the drain
bolt to drain the oil.
5. Install the drain bolt and tighten to the
specified torque.
Tightening torque:
Drain bolt (final gear case):
23 Nm (2.3 m·kg)
8-43