Table des Matières
Publicité
1. Coolant drain bolt
1. Boulon de vidange du liquide de refroidissement
1. Perno de drenaje del refrigerante
1. Trough
1. Feuille de papier repliée en forme de conduit
1. Pasante
Changing the coolant
WARNING
Wait for the engine and radiator to cool before
removing the radiator cap. You could be
burned by hot fluid and steam blown out un-
der pressure. Always put a thick rag over the
cap when opening. Allow any remaining pres-
sure to escape before completely removing
the cap.
1. Put the ATV on a level place.
2. Remove panels E and F. (See pages 8-27 ~
8-29 for removal and installation proce-
dures.)
3. Place a container under the engine and re-
move the coolant drain bolt. (Use a trough
or a similar object as shown to prevent
coolant from spilling on the footrest.)
4. Remove the front carrier and panel C. (See
pages 8-23 and 8-25 for removal and in-
stallation procedures.)
8-57
EBU00679
Publicité
Chapitres
Table des Matières
Dépannage
