Motorization Connection - SCS Sentinel OPEN 2 Manuel D'installation

EN

MOTORIzATION CONNECTION

> Overview of Electrical connections
1
5
1 24V motor with electronic and integrated adapter.
2
Secondary motor 24V, cable 2 x 1.5 mm
3 Flashing light 24V, cable 2 x 1 mm
4 Security photoelectric cells, cable 2 x 0.75 and 4 x 0.75 mm
5 Power supply 230V cable 2 x 1.5 mm
Nb :
It is imperative that the 230v mains power supply be protected by a differential residual
current circuit breaker with a minimum sensitivity rating of 30mA.
Do not connect the mains supply directly to the circuit board or the motors (230v power
supply must be connected only to the block connector with integrated fuse)
EN ::: 22 EN ::: 22
3
4
2
2
to connect on the domino with integrated fuse
2
4
2
2