Automatic Mode - SCS Sentinel OPEN 2 Manuel D'installation

EN

2/ AUTOMATIC MODE

Press on the remote control
Gate opens
With this mode, you only use the remote control to open the gate. It will close automatically. This operating mode
requires photoelectric cells to be installed.
▌PRACTICAL EXAMPLE 1
You press your remote control a second time while the gate is opening.
Press on the remote control
The gate opens
▌PRACTICAL EXAMPLE 2
You press your remote control a second time during the pause.
Press on the remote control
The gate opens
In this instance the pause is cancelled. You need to use your remote control to close the gate.
* Pressing it while the gate is opening has no effect.
3/ «SMALL COMMONHOLD» MODE
This mode functions like the automatic mode (2) except for two variants.
▌PRACTICAL EXAMPLE 1
Press on the remote control
The gate opens
EN ::: 28
Pause from 1 to 180 seconds
2 press on the remote control
nd
the gate stops
Pause
2 press
nd
on the remote control
Pause
2 press on the remote control
nd
The gate closes
Automatically
The gate closes
Automatically
The gate closes
3 press
rd
Stops opening
Pause
of the gate
The gate closes
Automatically